Beamsplitter Cubes
The beamsplitter cubes are made of right angle prisms
(crown glass BK 7) for a variety of spectral ranges.
The splitting layer is metallic (silver); the
splitting ratio is 45:45% (± 5%) for average polarization.
The splitting layer slightly polarizes the splitted light: the transmission
of the p-polarized component is about 5 to 15% higher than that of the
s-component. The outer surfaces are broadband multilayer antireflection
coated.
The surface accuracies of the right angle prisms
are λ/10; the deformation of a transmitted wave
is dependent of the homogeneity of the glass and often meets the quality
of the surfaces. The prismatic deviation is not larger than about 1'.
| Cube | Wavelength Range | |||||||
| Size | 400 - 700 nm | 600 - 900 nm | ||||||
| Ordernr. | Price 1 pc. | Price 2-5 pc. | Price 6-10 pc. | Ordernr. | Price 1 pc. | Price 2-5 pc. | Price 6-10 pc. | |
| 5 mm 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm |
TWK 05 TWK 10 TWK 15 TWK 20 TWK 25 TWK 30 TWK 40 |
on request € 150 € 195 € 245 € 333 € 410 € 534 |
on request € 133 € 178 € 232 € 314 € 380 € 497 |
on request € 122 € 167 € 223 € 302 € 360 € 473 |
TWK 1.05 TWK 1.10 TWK 1.15 TWK 1.20 TWK 1.25 TWK 1.30 TWK 1.40 |
on request € 150 € 195 € 245 € 333 € 410 € 534 |
on request € 133 € 178 € 232 € 314 € 380 € 497 |
on request € 122 € 167 € 223 € 302 € 360 € 473 |
Accesories
The cylindrical mounts holders described at Polarizing Beamsplitter Cubes are suited for beamsplitters of sizes between 10 mm and 25 mm.
Available on special order
- Beamsplitter cubes with dielectric absorption-free splitting layer for one specified wavelength or a narrow wavelength range. → on request
- Beamsplitter cubes of fused silica for use in UV or in mid-range IR. → on request
- Beamsplitter cubes of raw glass with specified homogenities. → on request
Data sheet